图片名称

Q500D steel plate

Q500D Steel Plate are used in Construction of Bridges, Highway Construction and Other Engineering construction
VIEW MORE +

5xxx Aluminum Coil/Sheet

Thickness:  0.15-150mm
Port of Destination:  Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
VIEW MORE +

A105 hot rolled steel round bars

ASTM A105 (also known as ASME SA 105) covers seamless forged carbon steel piping components for use in pressure systems at ambient and high-temperature service.
VIEW MORE +

SS330 steel with high strength

Under Janpan steel standard JIS G3101,there are carbon steel grades ss330,ss400,ss490 and ss540.For carbon steel plate SS330,when rolling the yield strength shall be above 205 Mpa for the thickness equal or below 16 millimeters,for the thickness between 16 and 40mm,the yield strength value shall above 195 Mpa.The tensile strength of common structural steel plate SS330 is within 330-430 Mpa. steel owned ten thousands tons jis g3101 ss330 in our stock warehouses with the thickness from 2mm to 300mm.
VIEW MORE +

Q500E steel plate

Q500E Hot Rolled steel plate is mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, excavator, car loader.
VIEW MORE +

P235GH Pressure Vessel Steel Plate

P235GH is a European specified steel for use in pressure vessels, boilers and heat exchangers. The composition of this steel makes it ideal for applications where elevated working temperatures are the norm and it's used by fabricators throughout the oil, gas and petrochemical industry.
VIEW MORE +
< 1...798081...168 >