Marine steel plate refers to structural steel used in ship building.
It is considered a marine grade and must be able to resist corrosive effects that are common in a water environment.
To achieve this, special alloying elements are added to these grades in order to defend agaist corrosion.
While most carbon steel is not suited for marine environments, there are several marine grade carbon steels that
have been approved by the different societies for shipbuilding applications.

+8619153115539

info@chengshunmetal.com

E-mail

PRODUCTS

MESSAGE

Product Details

Brief introduction of marine steel plate

Marine steel plate refers to structural steel used in ship building. It is considered a marine grade and must be able to resist corrosive effects that are common in a water environment. To achieve this, special alloying elements are added to these grades in order to defend agaist corrosion.While most carbon steel is not suited for marine environments, there are several marine grade carbon steels that have been approved by the different societies for shipbuilding applications.

Structural steel for ship hulls is divided into strength classes according to its minimum yield strength: general strength structural steel and high strength structural steel. Maine steel plate refers to hot rolled steel plate produced in accordance with the requirements of the classication society for the construction of ship hull structures. The general strength steel s of the China Classification Society are divided into four quality grades: A B D and E.

There are 9 main classification societies in worldwide.
A.B.S   American Bureau of Shipping
B.V.     Bureau Veritas
C.C.S.   China Classification Society
D.N.V Det Norske Veritas
G.L.   Germanischer Lloyd
K.R.    Korean Register of Shipping
L.R.    Lloyd’s Register of Shipping
N.K.    Nippon Kaiji Kyokai
R.I.N.A Registro Italiano Navale

ASTM A131 is A structural grade of steel plate utilized almost exclusively in the shipbuilding industry. This grade is defined as ordinary strength with specified minimum yield of 34KSI(235Mpa). Applications include barges, marine equipment and ship construction. These grades are also certified by the American Bureau of Shipping(ABS)

Shipbuilding is central to America’s identity and American ingenuity shines in its submarines, yachts, cruise ships, and aircraft carriers. Great ships start with high-quality marine grade steel plate and Gnee is proud to supply the American shipbuilding industry with marine and offshore steel that’s corrosion-resistant and tough, demonstrating decreased brittleness, even in cold temperatures, and increased strength to resist force trauma and vibration. All of our marine grade plate meets the standards set by ABS (American Bureau of Shipbuilding), ASTM, and API (American Petroleum Institute). We’re a trusted supplier of marine & offshore steel plate across world and service shipbuilders

Chemical composition and mechenical properties

Chemical Requirement for Ordinary-Strength Structural Steel

Element	Grade A	Grade B	Grade D	Grade E	Grade CS
	Deoxidation and Thickness(t) in mm
	t>2.0 in(50mm)	t>2.0 in(50mm)	t>1.0 in(50mm)
C	0.21	0.21	0.21	0.18	0.16
Mn min	2.5XC	0.60	0.60	0.70	1.00
Si	0.50	0.35	0.10-0.35	0.10-0.35	0.10-0.35
P	0.035	0.035	0.035	0.035	0.035
S	0.035	0.035	0.035	0.035	0.035
Ni	-	-	-		-
Cr	-	-	-	-	-
Mo	-	-	-	-	-
Cu	-	-	-	-	-
C+Mn/6	0.40	0.40	0.40	0.40	0.40

Chemical Requirement for Higher-Strength Structural Steel

Element	Chemical composition(heat analysis% max
	AH/DH/EH32 AH/DH/EH36 and AH/DH/EH40	FH32/36/40
C	0.18	0.16
Mn	0.90-1.60	0.90-1.60
Si	0.10-0.50	0.10-0.50
P	0.035	0.025
S	0.035	0.025
Al min	0.015	0.015
Cb	0.02-0.05	0.02-0.05
V	0.05-0.10	0.05-0.10
Ti	0.02	0.02
Cu	0.35	0.35
Cr	0.20	0.20
Ni	0.40	0.40
Mo	0.08	0.08
N	-	0.009

Tensile Requirement for Ordinary-Strength and Higher-Strength Structural Steel

Grade	Tensile Strength ksi(Mpa)	Yield Strength min ksi(Mpa)	Elongation in 8 in (200mm) %	Elongation in 2 in (50mm) min %
Ordinary strength	58-75(400-520)	34(235)	21	24
A B D E CS	58-75(400-520)	34(235)	21	24
Higher strength
AH32 DH32 EH32 FH32	64-85(440-590)	46(315)	19	22
AH36 DH36 EH36 FH36	71-90(190-620)	51（355（	19	22
AH40 DH40 EH40 FH40	74-94（510-650）	57（390）	19	22

CUSTOMER TRANSACTION

Always adhere to the tenet of high quality, low cost, fast pace and excellent service. Shandong Chengshun Metal Materials Co., Ltd. is willing to cooperate sincerely with friends from all walks of life at home and abroad for common development.

STORAGE VIDEO

Factory Appearance

Shandong Chengshun Metal Materials Co., Ltd. is located in Jinan City, Shandong Province. It is a comprehensive company dealing in high-quality steel products, with a superior geographical location and very convenient transportation. The company has a complete and scientific quality system, and has been recognized by the industry for its integrity, strength and product quality.

Packing and shipping

Mainly exported to Europe, Southeast Asia, South Africa, the Middle East, Latin America and other countries and regions, the products are favored by Chinese and foreign users.

CERTIFICATE OF HONOR

COOPERATIVE PARTNER

PRODUCTION WORKSHOP

Shipbuilding Steel Plate